When using a stud finder, use painters’ tape to mark out at least three studs in a row, then measure the distances between the studs. Even after utilizing the first three methods, you still might not where the studs are. The first is to use a very small drill bit, or even a small precision screw driver, to poke a hole in the wall where you think a stud should be – below are tips to help you with this guess. A stud finder can also be used to find pipes, electrical live wire and even to find microchip inside a wall or even inside your dog or any other pet. This is a common scenario when trying to find studs above a fireplace, where there may not know actually be any studs to find. Drywall anchors can work wall, but you never truly know the quality of drywall. However, it is always recommended to buy a more quality product when conducting work that demands high efficiency and accuracy. It includes an ergonomic handgrip for more comfortable use, auto-shutoff when not in use and a low battery indicator.
The easiest and most common method of locating studs within a wall is to use an electronic stud finder. Most homes are built with 16” on-center studs, which means there should be a stud every 16”. If you have trouble finding studs on a wall, verify how far apart they are in the home by locating and measuring them on another wall. Keep this in mind if you have trouble finding studs above a fireplace. If you have trouble locating studs in the room, consider investing in a stud finder that measures the thickness of the wall to locate studs. So, let’s have the lesson of how to use a stud finder of different models. Though the procedure of using a stud finder of a different model or different company is almost same, rather here we discussed of some of the popular models of stud finder that will help you to understand the whole process easier.
The accuracy of using an instrument is greatly depended on how well and perfectly you are using that tool. However, it works well for detecting false positives from electronic stud finders. Some cheap magnetic stud finders can scratch the wall, so make sure you get one with felt pads to protect the wall. This is done to make TV mounting easy because you can anchor anywhere into the plywood using a hollow wall toggle. Whether you are mounting a TV, speaker, or on-wall shelf, it’s always best to anchor into a stud. It’s becoming common practice to use plywood backing above fireplaces. Once you have decided to hang a picture in the home or office, first of all, you should need to make use of the best stud finder equipment. You could make the hole large enough to actually peer inside the wall, or just large enough to fit an angled, thin tool in the wall. If you are doing this against a stud, it will not work, so you may have to end up doing it again to make sure that it is properly calibrated.
In any case, it is a good idea to have the power company connected to your solar panel installation in order to have a backup energy source. The large display will show you the result so there is no waste of energy by calculating. Don’t worry if you only find one stud when trying to mount a large TV or other heavy object. The second method is to cut out or drill a hole that’s large enough for you to “see” what’s in the wall. Each model varies slightly, but generally speaking, you place the stud finder on the wall, hold down a power button until the device beeps – this indicates that it has finished taking an initial reading of the well – then slowly move the stud finder along the wall until it lights up/beeps indicating a stud. Level it and mark the place for holes on the stud that you found earlier. It is up to homeowners to decide on how high the plasma TV should be place on the wall. It may have been damaged by water, or it may simply pull off the wall if poorly installed.